Background of Experiment
□ Al-Si Alloy
AI + Si = Al-Si Alloy
1. Low melting point
2. light
3. Large heat capacity
4. Insoluble to each other
.
.
.
Result and Analysis - EDS
□ Composition Analysis
Al, Si is almost insoluble to each other at rsoom temperature.
All solid phase will have either 100% Al phase or 100% Si phase.
Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free Solder중에서도 각 재료마다의 Mechanical Bonding Test를 실시하여 Bonding Force를 체크한다. 보통 Soldering 된 제품이 받는 Stress 는 Tensile Stress 보다는 Shear Stress 가 주요하기 때문에 Solder 선택 시에는 Solder의 Tensile Property 보다는 Shear Pr
2.7 Shrinkage
- Theoretical value: (a=35, : Maximum Shrinkage Strain Ratio)
- The process of finding 'a'
1. Arranging excel data
2. Finding 'a' with using a grapher program
(Converting Excel data into graph shape)
(Standardization of graph through regression analysis)-회귀분석을 통한 그래프 평균화
(Finding 'a' with using shrinkage equation)
3. Finding 'a'
Tensile Strength
Indicated by the maxima of a stress-strain curve and,
in general, indicates when necking will occur.
Tensile strength obtained from tests of the double
axial loads P notation refers to the value
calculated by dividing .
ShearStrength
-An intersecting point of th
strength, UTS)까지 힘을 받지 않아도 파괴되어 버리는 Fatigue 현상이 있다.
<그림 1> Mechanical Bonding Test1. Mechanical Bonding Test
기계적 강도 측정법(Mechanical Bonding Test)에는 크게 두 가지가 있는데 <그림 2>와 같이 Shear Test와 Pull Test가 있다. 현재 가장 흔히 쓰이는 방법은 Shear Test로 Solder를 PCB 기판에 접합 후
in the range of theory, and the value from the second experiment is 0.16 which also comes under the range of theory. In case of specimen no.1, there was an error of 12.6% but the Poisson's ratio is highly appropriate. From this, we can analogize the Poisson's ratio has nothing to do with strength, but is related to the materials.
4. Shear Modulus of Elasticity
‣ Theoretical Value
strength)이므로 실제 인장강도보다 10%~15% 높게 나온다. 따라서 우리는 실험값에 0.9를 곱하여 보다 정확한 수치를 구했다. 그렇게 나온 값은 모두 이론값의 범위에 포함되며 큰 오차는 없었다.
3. 전단강도 실험은 매우 까다로울 뿐만아니라 실험값도 정확히 나오지 않기 때문에 실험으로 얻은 압축강도
1. 실험목적
① 시편을 일정한 속도로 일축방향으로 인장력을 가하여 재료의 항복점, 인장강도, 연신율, 단면수축율 및 하중과 연신량선도 등의 기계적 성질을 평가한다.
② 비례한도, 탄성한도, 탄성계수등과 같은 물리적성질을 이해하고 기계설계의 기초자료로 이용할 수 있다.
③ 인장에 대한 변
Keff, Km, Kp : the effective thermal conductivities of the composite,
Metal matrix, Particles
φp : the volume fraction of reinforcements
a : the diameter of the reinforcement
- hc : the boundary conductivity.
Advantage
The air travels across the short
length of the fins laterally, rather than longitudinally down
the long length.
Focused on placing